Getting the right instrumentation
Fill out an application datasheet and send it to Lesman. We'll make sure you get the right instruments for your application.
Lesman is the exclusive authorized local Siemens representative in Illinois, Indiana, Wisconsin, Eastern Missouri, Paducah Kentucky, and Upper Peninsula Michigan.
Bulk Solids Flow and Motion
- Finding the Right Belt Scale for Your Application
- Not sure which Mass Dynamics belt scale fits your application best? Look here to compare belt scale features side by side.
- Siemens Milltronics Mass Dynamics Belt Scales
- Milltronics MBS Modular Medium-Duty Belt Scale
Milltronics MLC Light Duty Monitoring Single Idler Belt Scale
Milltronics MUS Universal Single Idler Belt Scale
Milltronics MCS Compact Stainless Steel Load Cell Type Belt Scale
Milltronics MMI Heavy Duty NTEP-Approved Multi-Idler Belt Scale
Milltronics MSI Heavy Duty Single Idler Belt Scale
Milltronics MWL Mechanical Calibration Weight Lifter for MSI, MMI, and MUS Belt Scales - Siemens Milltronics Mass Dynamics Integrators
- Milltronics Accumass BW100
Milltronics Accumass BW500
Milltronics Accumass Compuscale III - Siemens Milltronics Mass Dynamics Solids Flowmeters
- Milltronics Mass Dynamics Millflo
Milltronics Mass Dynamics E and A Series
Milltronics Mass Dynamics M Series
Milltronics Mass Dynamics Senaco AS100 Acoustic Sensor and Controller for Bulk Solids Flow - Siemens Milltronics Mass Dynamics Speed and Motion Sensors
- Siemens SITRANS AS100 Acoustic Sensor and CU-02 Control Unit for Bulk Solids Flow
Siemens MD-256 Digital Speed Sensor
Siemens Milltronics MFA-4p Motion Failure Alarm Monitor with Motion-Sensing Probes
Siemens RBSS Return Belt Speed Sensor
Siemens Milltronics ZSS Zero Speed Switch - Siemens Milltronics Mass Dynamics Weighfeeders
- Milltronics Series 400 (9" to 12" Belt Width, 33" Inlet to Discharge) Weighfeeder
Milltronics Series 600 (12" to 36" Belt Width, 52" Inlet to Discharge) Weighfeeder
Milltronics Series 800 (18" to 42" Belt Width, 62" Inlet to Discharge) Weighfeeder
Milltronics Series 1200 (18" to 72" Belt Width, 93" Inlet to Discharge) Weighfeeder
Siemens VG Volumetric Control Gate - No Longer Available - For Reference Only
- Milltronics Mass Dynamics MD-36A Speed Sensor
Milltronics Mass Dynamics MTS Torque Shaft Belt Scale
Milltronics Mass Dynamics Series 600 (12" to 36" Belt; 52" Inlet to Discharge) Sanitary Duty Weighfeeder
Milltronics Mass Dynamics Accumass Compu-M
