Need sales support? Call 800-9LESMAN (That's 953-7626)
Mon-Fri 7:30am to 5:00pm Central Time

Phoenix Contact RADLink Configuration Software

• Configuration of Phoenix Contact Radios can be done via the RADLink software
• RADLink software can be downloaded by owners of Phoenix Contact radio products free of charge below.
• RADLink software requires Windows 98, 2000 or XP, 2MB of hard drive space, a minimum of 800x600 screen resolution and a RS232 serial port (or a USB port with a USB to RS232 converter).
• Basic software is free (configures one master radio, one slave). Download below.

Monitor and control, extend Ethernet network, expand serial networks, while eliminating cost of cable, conduit and trenching and gaining mobility. This version of the sofware allows you to configure the master radio and one slave, and perform monitoring functions. Upgrade licenses can be purchased if you need to configure multiple slave radio devices.

Supporting Documentation
Click the file icon to view the file online, or right-click on the file icon and select "Save Target As..." to download the file to disk for later viewing.

Type	Description	Size
	Lesman Catalog Section: Wireless Instruments and Communications	2.3MB
	Phoenix Contact Data Radio and RADLink Software User Manual	7.3MB
	Phoenix Contact RADLink Data Radio Configuration and Monitoring Software v3.24	4.2MB

<Start Over> <Back One Page> <Wireless Instruments> <Phoenix Contact Products>

Last Ed. Date: 01/13/2012 03:34 PM